P225
  • Grips are releaved for new mainspring.
  • P220 Screws will fit the P225.
  • Grip screws should be torqued to 13-15 inch lbs. Blue Loctite is suggested on the threads.
  • A quality correct fitting 3/32" hex / Allen or slot driver is a must!
  • Grips will fit European made P6 variant.
P225-A1
  • Will not fit the SIG P225
  • P225-A1 is the same thread pitch as the P220 screws. The length is longer for the P225-A1. P220 screws will work with approximately 3 threads engaged.