Tracker and Judge
- Fits Models: 17, 44, 405, 415, 425, 4410, 445, 450, 4510, 455, 606, 617, 627, 692, 817, 970, 971, 990, 991, 992 etc.
- Revolvers come from factory with closed backstrap "ribber" type grips with single attachment screw at bottom.
Grip tang underneath grips is rough machined with no finished backstrap. - Will fit Judge models. Same grip frame as the Tracker series.
- Does NOT fit the Raging Judge
- Does NOT fit the Raging Bull
- Does NOT FIT PUBLIC DEFENDER MODELS. Public Defender is built on the XS frame.
- The grip is not recommended for the Polymer Public Defender Judge models.
- Customers have installed this grip on the metal framed Public Defender Judge model. They use a 4mm X .7 screw between 35mm and 40mm long. The back top of the grip frame sits below the top of the grip and, due to the narrower frame. The back of the thumb piece also contacts the grip. The edges of the grip by the trigger guard overlap the trigger guard. The grip can be modified to clear the interference fits by cutting or grinding the rubber but this is not recommended.
- We do not have the longer screw in stock and are unable to send a longer screw.