EAA Witness (9mm)

  • Will NOT fit the .45 in wood
  • Rubber grip does not fit the .45 without first heating grip and stretching around frame, tight fit...
    Grip screws should be torqued to 13-15 inch lbs. Blue Loctite is suggested on the threads. A quality correct fitting slot driver is a must!
  • EAA Witness has two frame sizes. A large size that is for all calibers and a small size that was made just for 9mm and 40. EAA has switched all of their witnesses over to Large frames Approximately 2005-2006.
  • Hogue Grips will fit the Small Frames but not the Large Frames. 
 

CZ-75, TZ-75 P-9 Rubber Wraparound with Finger Grooves Black

 

TZ-75 EAA/P9 - Chain Link - G10 GMascus BLACK-GREY

 

TZ-75 EAA/P9 - Smooth - GONCALO

 

TZ-75 EAA/P9 - Checkered - GONCALO

 

TZ-75 EAA/P9 - Smooth - PAU FERRO

 

TZ-75 EAA/P9 - Checkered - PAU FERRO

 

TZ-75 EAA/P9 - Smooth - KINGWOOD

 

TZ-75 EAA/P9 - Checkered - KINGWOOD

 

TZ-75 EAA/P9 - Smooth - COCO BOLO

 

TZ-75 EAA/P9 - Checkered - COCO BOLO

 

TZ-75 EAA/P9 - Smooth - ROSEWOOD

 

TZ-75 EAA/P9 - Checkered - ROSEWOOD